User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 5 Troubleshooting
33
A paper jam occurs at the front tractor. Pull the
ejected paper outward gently and press the
ONLINE key to restart printing.
When the PAPER JAM still remains, remove all
paper and reinstall the paper into the tractor
properly and press the ONLINE key.
Re-adjust the gap between the print head and the
paper, by #1 HEAD ADJUSTMENT. When the
paper thickness may be not constant, set YES at
#49 LF STABLE. When the PAPER JAM
appears despite no actual paper jamming, set NO
at #39 PAPER JAM DETECT.
A paper jam occurs at the rear tractor.
See the above column of PAPER JAM FRONT
TR for troubleshooting.
Fanfold paper is not fed properly.
Remove the paper and reinstall the paper into the
tractor properly.
A cut sheet is not ejected properly. Remove the
paper manually.
• This error occurs if the printer detects that a
cut sheet paper is loaded on the big skewed
angle manually.
The ERROR lamp blinks, and the buzzer
sounds three times.
The paper is ejected and the printer enters the
offline state.
Load paper again. If it is loaded straight, the
printer enters the online state.