User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 5 Troubleshooting
31
The message is displayed on the LCD and returns to the
normal display after the initialization 1.
• EEPROM Initialization 2
The learning of the sensors switching position is performed. The settings in the MENU mode are
not changed.
[Procedure]
Set 15-inch fanfold paper to the rear tractors.
Keep the SPEED and TEAR OFF keys depressed and turn on the printer.
After confirming the paper setting, press the ENTER key.
When the message is displayed, press the MENU key. The
printer returns to the normal mode.
5.2 How to solve the error message
5.2.1 Functional error message
The functional errors means that serious error that can not be recovered by the key operation.
When a functional error occurs, turn the power off once and turn the printer on after
removing paper inside the printer.
If the message remains still after the above procedure, please contact the dealer.
HAI SENSOR ERROR
HA SENSOR ERROR
HOME SENSOR ERROR
FUNCTION MCMTR1 ERROR
FUNCTION MCMTR2 ERROR
FUNCTION MCMTR3 ERROR
FUNCTION MCMTR4 ERROR
RIGHT EDGE SENSOR ERROR
LEFT EDGE SENSOR ERROR
PAPER EDGE SENSOR ERROR
SKEW PULSE ERROR