User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 3 Setup options
27
3.1.2 Setting example
The following is the example to change the page length of fanfold paper from 11 to 8 inch.
1. Press the MENU key while depressing the ALT key.
+
2. Select #7 with the
or key.
3. Press the
key.
4. Press the
or key to display "8 INCH" on the LCD.
5. Press the ENTER key. "8 INCH" is marked with on asterisk.
6. Press the MENU key. The setting is automatically saved and the printer is initialized.
For the details of the setup memory, see the Owner’s Manual in the packed Driver-CD.