User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 3 Setup options
26
Chapter 3 Setup options
3.1 How to use the setup modes
The printer has setup modes, i.e., function setting modes that are unique to this printer. The setup modes
enable various printer functions to be set up with the function keys on the operation panel.
This section provides an the outline of the setup modes and the details of the setup functions.
For the details of the setup modes, see the Owner’s Manual in the packed Driver-CD.
3.1.1 Keys used for setting
1. Setup key
Press the ALT+SETUP key to enter the SETUP MODE.
+
2. Menu selection keys
These keys are used to change the displayed menus. They
change only the display and do not change the setting.
The menus is changed rapidly when the or
key is depressed and held for a second or more.
3. Item selection keys
These keys are used to change items displayed in a menu.
They change only the display and do not change the setting.
4. ENTER key
To select a displayed item, press the ENTER key. When the ENTER key is pressed, the selected item
is marked with an asterisk (*), and the menu reappears.
5. MENU key
Press the MENU key to exit the MENU MODE.
The setting is automatically stored in the memory of the printer, and the printer, is initialized.
LCD