User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 1 Setting up the printer
17
8. Move the ASF release levers to the back to fix the
paper bin.
9. Slide the paper path lever to the symbol
or the position of "AUTO".
The lever position should be at "AUTO" when using the
printer driver.
10. Perform the trial printing after connecting the
printer to the computer.
In case of tilting vertically the printing start position should
be adjusted by “6 TOF ADJUST”.