User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 1 Setting up the printer
12
5. The both tractors can be moved right and left to
meet the width of paper or printing data when the
lock lever is released.
• Set fanfold paper onto the tractors.
6. Put the paper rack down.
Press the paper rack on the paper rack.
7. Slide the paper path lever to the symbol or the
position of "AUTO".
The lever position should be at "AUTO" when using
the
printer driver.