User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 1 Setting up the printer
6
4. Move the both paper guides to the right / left end.
5. Connect the connector on the left side of tractor to the
connector on the rear side of the printer. Then install the
rear tractor.
6. The both tractors can be moved right and left to meet the
width of paper or printing data when the lock lever is
released.
CAUTION
Do not put your finger
under the tractor cover
• Set fanfold paper onto the tractors.