K O N F T E L .
SAFET Y PRECAUTIONS Electric safety Installation and operation must take place in accordance with electric safety standards. Use caution during transport Avoid stress, vibration or soakage in transport, storage and installation. Polarity of power supply The power supply of this product is +12V, the max electrical current is 2A. Polarity of the contact is shown in illustration. Installation precautions Do not grasp the lens when carrying the camera. Don’t touch camera lens with your hand.
TABLE OF CONTENTS Maintenance 4 Packing list 5 Appearance and Interface 6 Installation 7 Camera maintenance ................................................ 4 Unqualified use ............................................................. 4 Remote control Service and Warranty 8-9 10 Warranty ........................................................................10 Service.............................................................................10 Konftel support................................
M AINTENANCE Camera maintenance • If the camera will not be used for a long time, please turn off the power switch and disconnect power cord of AC adaptor from the outlet. • Use a soft cloth or tissue to clean the camera cover. If the camera is very dirty, clean it with a diluted neutral detergent. Do not use any type of solvents, which may damage the surface. • Please use a soft, dry and clean cloth to polish the lens.
PACKING LIST Konftel Cam50 Remote Control 2x Batteries AAA 5 m USB 2.
APPE ARANCE AND INTERFACE USB 3.0 IN RS232 OUT LINE IN + DC 12V AC Adapter USB 3.0/2.0 RS232 OUT LINE IN (Not supported) RS232 IN 1. Please check that connections are correct before starting. 2. Connect the AC adapter to the power connector on the rear panel of the camera. The power indicator on the front panel should light up. 3. After the camera is powered on, it starts to initialize: to the top limit position and then both horizontal and vertical before stopping at the middle position.
INSTALL ATION USB cable HDMI cable (not included) 7
REMOTE CONTROL 1 CAMERA SELECT 1 2 2 STD 3 4 CAMERA SELECT 10 1 REV CAMERA SELECT 1 STD 2 2 STD 3 3 4 REV CAMERA SELECT 4 1 REV STD 3 2 3 4 REV 11 12 4 PRESET PRESET RESET RESET PRESET 13 5 14 6 15 7 16 8 17 9 8 PRESET RESET RESET
REMOTE CONTROL No. Name Function Description 1 Standby Button Enter into standby mode 2 Position Buttons To set preset or call preset 3 * Button Used with other buttons 4 Set Preset Button Store a preset position. [PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position. 5 Pan-Tilt Control Button Press [HOME] back to the middle position. 6 Back Button Press to return to previous.
SERVICE AND WARRANT Y Warranty We give a two-year warranty on our conference devices. Service Service is offered after the expiration of the warranty. Please contact your reseller and ask for a cost estimate. Konftel support If you have any questions about the warranty and service, please contact your Konftel support centre. Europe: +44 1483 308 003 (Monday-Friday 8.00 AM-5.00 PM GMT-1) +46(0)90-706 489 (Monday–Friday 8.00–17.00 GMT+1) E-mail: support@konftel.com Website: www.konftel.
Konftel is a leading company within collaboration endpoint solutions. Since 1988, our mission has been to help people in businesses around the world to have meetings regardless of distance. Based on our success, we know that remote collaboration is a smooth way to save time, money and at the same time contribute to a more sustainable world. Crystal clear audio and a sharp video image are essential for efficient meetings, this is why we only focus on cutting-edge technology in our Collaboration Solutions.
