User guide

5
DESCRIPTION
Mute button

Press the button (the actual button on the right) to turn the microphone off during a
call.
The LEDs show a steady red light and two buttons are displayed.

Press the button if you also want to turn the speaker off.
The LEDs ash red.

Note that the buttons on the screen disappear after 5 seconds or if you touch the
screen outside the buttons.

Press once again (the actual button on the right or the button on the screen) to turn
the microphone (and speaker) on.
The LEDs show a steady blue light.
Power save mode
The Konftel 55 has several power save mode levels. After ve minutes, the background
lighting fades and after 15 minutes the image on the screen is replaced by a clock. Less
time if running on battery power. The display can also be turned off manually.

Press the button (the actual button on the left) to turn the display off.

Press the display or the button to restore full brightness if power save mode has
turned off the display.
Switching off

Hold down the button (the actual button on the left) for three seconds.

Conrm that you want to switch off the Konftel 55 by pressing .
BRIDGE CONNECTION
It is possible to establish an audio conference bridge between a connected phone and the
computer. This means that you can make a call with your connected mobile or desktop
phone and combine it with, for example, a Skype
®
call on the computer.
Audio bridge combinations other than a phone and computer are not possible.
Find out more about audio bridging on page 13.
LEDs
On/Off/Power save mode Mute (microphone off / speaker off)