Installation Guide

Calibrating the LogiCam Sensors

The LogiCam contains an internal accelerometer that detects unsafe

driving events. The accelerometer is not calibrated in advance as the

installation in every vehicle is different. Please follow the following steps

to calibrate the accelerometer. Before you start, make sure that the

vehicle is parked on a level surface.

• Turn on the vehicle’s ignition.

• Check that the camera is on.

• Press the touchscreen and enter the security PIN.

• Enter into the “Settings” menu.

• Select “Calibrate”.

*The calibration process takes about a second once completed.

Note: Recalibration is required in case of transferring the dash cam to another vehicle.

Settings Menu

Enter the “Settings” mode in the main menu to set your camera:

• WiFi Hotspot

• Video Preset

• Select APN

• Driver Camera

• Text Overlay

• Distracted Driver

• In-Cabin Recording

• Driver Position

• U.S. Date Format

• Speed in MPH

• Audio Alarms

• Notify Live Streaming

• Change PIN

• Change Driver PIN

• Calibration

• Brightness

• Serial Numbers

• Format SD Card

• Power Off