Installation Guide

4
Install My20 LogiCam
Before you start the install, make sure that the vehicle is parked on a
level surface and that the windshield is clean and dry.
• Unscrew the safety screw that lock the tamper proof cause
using the specialty screwdriver.
• Insert the SIM and SD cards.
• Attach the mounting bracket onto the camera.
• Place the camera as high as possible on the driver side of the
vehicle.
• Remove the 3M adhesive tape cover, and mount the camera to
the windshield.
DO NOT INSTALL THE PRODUCT IN A LOCATION
WHERE IT CAN OBSTRUCT THE DRIVERS FIELD OF
VISION.