K-multi6 User manual
IMPORTANT SAFETY INSTRUCTION • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Follow all instructions – All operating and use instructions should be followed. WARNING! • WARNING – Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.
COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
BOX CONTENTS 1. Power cord 2. KONEX K-multi6 SUB 3. KONEX K-multi6 TOP SPEAKER 4. (2x) KONEX K-MULTI6 SPACER 5. User Manual 3. 2. 4. 1. 5.
AMPLIFIER FUNCTIONS 15 16 16 2 3 4 5 6 1 7 9 10 8 11 13 14 12 K-multi6 Vertical Tube Powered Array Speaker 1. USB Port 2. Mic level: Control the signal for Mic input when using the Mic input. 3. Inst level: Control the signal for Inst input when using the Inst input. 4. Line Level: Control the ouput volume for Line Level Input. 5. High Boost: High shelf filter to adjust the treble to the room acoustics. 6. System switch: To select channel stereo and Mono. 7.
INSTALLATION Speaker Array Only 1 Spacer 2 Spacers CONNECTIONS 1- Connect the OUTPUT from your signal source ( mixing console, microphone, preamp, line-level source) directly to the INPUT connector on the back of the speaker. It accepts balanced line level signals from mixers, preamplifiers, etc., and accepts direct connections from dynamic microphones through the MIC input. 2- There also an XLR OUTPUT connector «LINE OUT».
BLUETOOTH PAIRING 1- Press and release the PAIR button on one speaker only 2- While pairing light is flashing, the «K-multi6» name will appear on your pairing device. 3- Click on «K-multi6» name on your pairing device to complete pairing. STEREO BLUETOOTH PAIRING 1- Press and release the PAIR button on one speaker only, this K-multi6 will be the LEFT channel of your sound system. 2- While pairing light is flashing, the «K-multi6» name will appear on your pairing device.
www.konexaudio.
