Operation Manual

- 25 -

q) Sewing on buttons
• Attach the button foot  and ...
• place the darning plate  on the existing
zigzag stitch plate, as described in Chapter 9.
• Lay the button between the button foot
 and the material and lower the button
foot  down.
• Turn the handwheel
s
anti-clockwise.
Check whether the needle passes cleanly
through both button holes.
• Adjust the stitch width of the zigzag mode
as necessary.
• If the sewing machine hits both button holes
during hand operation, you can now sew 5-7
stitches with the machine by carefully pressing
on the foot switch .
r) "Edge-to-edge" sewing
• To do this, select the three-stitch zigzag
("H") or the honeycomb stitch ("K") as the
stitch pattern.
s) Decorative stitches
• Select the stitch patterns (N-Q) if you want
to apply various decorative stitches to your
textiles.
Lervia KH 4000



KH
NOPQ
IB_SewingMachine_UK 12.06.2006 14:52 Uhr Seite 25