Operation Manual

- 10 -
• Put the bobbin case
l
back on the pin and ...
• turn the bobbin case
l
until the driver
catches in the notch.
• Lay the excess thread such that it does not
bind anywhere ...
• then close the gripper flap
”
.
• You can simply slide the box compartment
2@
back on – for instance if you need this
as an "extension table" for sewing large
material. You can also leave the box compart-
ment off, for example for free-arm sewing
of arms, trouser legs, etc.
18 e
Lervia KH 4000
1*
”
2@
18 e
IB_SewingMachine_UK 12.06.2006 14:52 Uhr Seite 10