UK Kompernaß Handelsgesellschaft mbH Burgstr. 21 • D-44867 Bochum www.kompernass.com ID-Nr.
Operating Instructions
Professional Meat Grinder Bifinett KH 3460 Contents 2. Technical Data 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Voltage ....................: 230 V / ~50 Hz Intended use .............................. 3 Technical data ............................ 3 Delivery contents ...................... 3 Safety instructions .................... 4 Assembly.................................... 5 Operation .................................. 7 Troubleshooting.......................... 9 Cleaning .................................
GB 4. Safety Instructions 4. Safety Instructions To avoid life-threatening electric shocks: To avoid the risk of accidents and injuries: • Make sure that the cable is not damaged. Protect the cable from heat and make sure that it does not get stuck or clamped. • • If the cable or the electric plug is damaged, get it replaced by customer service, before you continue using the appliance. Never put your hand into the openings of the appliance.
5. Assembly All accessories are coated with a thin oil film to protect them from corrosion. Therefore clean all the parts carefully before using the appliance for the first time, in accordance with the detailed instructions found under “8 Cleaning”. 5. Assembly • - Press in the meat grinder lightly. Turn the stuffing funnel of the meat grinder upwards till it is vertical (Fig. B). Unfold the fold out. There you will find the step-by-step illustrations for assembling the appliance.
c) Fixing the kubbe attachment Once the meat grinder has been assembled as described under a): • GB • • • Turn open the ring clamp and ... Replace the cutting disc with the two plastic parts of the kubbe attachment . Fix these as described in a). When everything has been attached correctly, screw on the ring clamp tightly. e) Fixing the shortbread cookie attachments Once the meat grinder has been assembled as described under a): • Turn open the ring clamp and ...
6. Operation 6. Operation Attention: In the case of foods, which need to be processed at high speeds, the appliance should not be run for longer than 10 seconds (!) at a stretch. Let there be a break of 30 seconds before switching it on again, to prevent the motor from overheating. • Then plug in...
GB c) Processing sausage meat d) Grating and cutting • Put the meat through the meat grinder twice before using it as sausage stuffing. After you have placed the food to be grated into the feeding tray : • To make the sausage stuffing, add some chopped onions, spices and other ingredients to the mincemeat as per your recipe, and knead the mixture. Refrigerate this for 30 minutes before processing it further.
• • Press dough evenly into the feeding tube – the transport screw pushes it through the design on the pattern strip of the shortbread cookie attachment . After you have read all the instructions about the topic ”shortbread cookie attachment“, you can use the appliance as described under 6 a). Warning: Never open the casing of the motor block– There are no operating parts to be found there. If the casing is opened there exists the possibility of a life-threatening electric shock.
• Never use any cleansers, abrasive substances or solvents. These could damage the device. GB b) Cleaning accessories • • Keep the machine away from children and elderly people. They may not always be able to assess potential dangers of the heating elements of such devices. Wash all the accessories that can come in contact with food, ... - by hand only, the accessories are not dishwasher safe.
