Installation Guide

firmly adhere the mural panel to the wall, sweeping your tool across
the strip from the center outwards and working out all air bubbles.
Apply additional strips in the same method, matching up the pattern at
the seam and carefully smoothing out all bubbles as you go. Properly
"booked" panels should not shrink when they dry, but be sure to
smooth the seams together as you go to be sure that they will not
separate.
5. If the mural is larger than the wall space, cut along the corners or
edges of the wall using a sharp knife and a straight-edge as a guide.
Make long cuts, without lifting the blade.