Instructions / Assembly

Rev. 00
2.
a. Determine orientation of rotating plate, plate may be flipped around to accommodate either
side of the ATV
b. Attach rubber coated ring to rotating plate using 1/2" washers and 1/2" nylock nut.
c. Attach u-bracket to rotating plate using 3/8” washers and 3/8” nylock nuts. These will need to
be positioned correctly to properly secure gun boot.
d. Attach rotating plate to mounting plate using 5/16” x 1” hex head bolts, 5/16” washers and
5/16” nylock nuts.
e. To secure gun boot use 5/16” x 1” bolts, 5/16” washer and 5/16” nylock nuts OR locking pin
provided.
FRONT OF ATV
14
5
9
12
2
10
13
13
15
1
4
3
10
13
6
U-BRACKET ONLY NEEDED
FOR GUN BOOT 4.3