SELECTION GUIDE S200 High Performance Servo Drives
Introduction Kollmorgen S200 Servo Drives S200 Series Drives Industry-Leading Performance In A Small Package Danaher Motion’s Kollmorgen S200 brushless servo drives push high performance servo technology into lower power applications than was previously possible without having to compromise on reliability or package size.
S200 Servo Drives Kollmorgen Increased Machine Throughput and Longer Life Reduced Overall Cost Servo system performance is synonymous with machine throughput. The S200 family takes servo performance to new heights. The S200 design requires fewer components helping to lower the overall machine cost. • Industry-leading current loop bandwidth up to 5KHz and velocity loop bandwidth up to 800Hz means machine throughput can be increased by as much as 2 to 3 times.
Specifications and Options Kollmorgen S200 Servo Drives Specifications Drive/Amplifier S20330 S20630 S20260 S20360 Input Voltage 10-90 VDC 20-90 VDC Control logic Motor Bus voltage 85-265 VAC, 47 TO 420 Hz, 1 phase 0-264 VAC, 47 to 420 Hz, 1 or 3 phase Output Current Peak (A rms) Peak time (Sec) ( ) convection, (40 deg C) 9 1 3 18 1 6 4.5 3 1.
S200 Wiring Diagrams Kollmorgen NC RX232 I/O RTN I/O RTN TX232 NC SFD +5 RTN 2 SFD COM- 3 SFD COM+/CU 4 NC/CV 5 NC/CW GND MOTOR POWER 1 PHASE W 2 PHASE V PHASE U 3 4 1 2 3 MOTOR +CTRL BUS/CTRL GND TB1 CHASSIS/PE - Control Power +CTRL 1 2 BUS/CTRL GND 3 +BUS + 10 - 90 VDC - Main Power + 20 - 90 VDC Alternate Dual Supply Wiring 1 J5 2 3 4 5 6 NOTE: I/O RTN and BUS/CTRL GND pins are connected together in the drive J3 S200 AC INPUT DRIVE FEEDBACK 1 J4 2 3 4 5 6 7 8 9 10 11 12 13 1
Introduction Kollmorgen AKM Series Motors The advanced Kollmorgen AKM high performance motor series offers a wide range of mounting, connectivity, feedback and other options.
AKM Series Motors System Overview - AKM Motors & S200 Drives Kollmorgen Recommended Motor/Drive Systems, 75 VDC bus ① Servo Motor Model Servo Drive Model Peak Stall Torque Tps➁ N-m (lb-in) Peak Torque at at Max. Speed Tms N-m (lb-in) Cont. Stall Torque Tcs N-m (lb-in) Cont. Rated Torque Tcr N-m (lb-in) Speed at Knee ωk rpm Rated Speed ωr rpm 0.264 (2.34) 0.0 (0.0) 0.0 (0.0) 0.19 (1.64) 0.30 (2.69) 0.40 (3.55) 0.18 (1.56) 0.30 (2.68) 0.40 (3.55) 3,530 1,380 0 ωmax. Speed ωmax rpm Cont.
S200 AC Base Mounting 131.57 (5.180) 4.57 (.180) RECOMMENDED MOUNTING HARDWARE: M4 OR #8 54.75 (2.155) DETAIL A SCALE 2.000 25.56 (1.006) Ø 4.57 (.180) 4.32 (.170) SEE DETAIL A 175.01 (6.890) 166.37 (6.550) Danaher Motion Customer Support Center 4301 Kishwaukee Street Rockford, Il 61109 Tel: 815-226-2222 Fax: 815-226-3080 Support e-mail: customer.support@DanaherMotion.com Internet: www.DanaherMotion.com S200 DC Base Mounting 100.84 (3.970) 4.57 (.
