User's Manual

22
The default setting is NOT Heading hold Mode.
You are allowed to activate the heading hold mode function
before taking o or in ight.
Fly under heading hold mode, you’re required to ensure the
drone front direction aligned with your front direction, DO NOT
change your direction of your transmitter and keep it y in
front of you all the time.(See below picture)
Warning: Do not use Heading Hold mode before you are sure that
the drone's front is your front. Otherwise, it might be
out of control or y away.
Picture 1 Picture 2
Front (Camera)
Rear (Power Switch)
Left Right
Front (Camera)
Rear (Power Switch)
Left Right
To turn on Heading Hold Mode, press Heading Hold Mode button
and the drone LED lights ash, which indicates the drone enters
heading hold mode.
To turn o Heading Hold Mode, press Heading Hold Mode button
again and the drone LED lights turn solid, which indicates the
heading hold mode is o.
Heading Hold
Mode Button
For technical support visti us at www.ykolibri.comFor technical support visit us at www.ykolibri.comFor technical support visit us at www.ykolibri.com