User's Manual

13
1. Make sure the electrodes are correct.
2. Do not mix new with old batteries.
3. Do not mix dierent kinds of batteries.
4. Do not charge the non rechargeable battery.
Notice:
Pre-ight Operation Instruction
Frequency Pairing
1. Turn on the transmitter switch (Picture 1) and the power
indicator light ashes rapidly. Push the Left Stick all the
way down to the lowest position and then release. The Left
Stick will back to the middle position automatically.
(Picture 2 / 3) The power indicator light ashes slowly,
which indicates the transmitter is ready for frequency pairing.
2. Power on the drone. (Picture 4）
3. Put the drone on the at surface, the drone body lights turn
from ashing to solid bright, which indicates successful
frequency pairing.
Picture 2Picture 1 Picture 3
Picture 4
For technical support visti us at www.ykolibri.comFor technical support visit us at www.ykolibri.comFor technical support visit us at www.ykolibri.com