Installation Sheet
13 
Control Panel Operations 
Using the Control Panel 
To Turn Unit on:  
Press the On/Off button . Note-The Energy Saver feature will automatically turn on in 
“Cool”, “Dry”, and “Auto” mode. 
To Change Temperature: 
Press or hold either the Up   or Down   button until the desired temperature is seen on 
the digital display. This temperature will be automatically maintained anywhere between 62 °F 
(17°C) and 86°F (30°C). 
To Adjust Fan Speeds: 
To select the speed of the fan press Fan Speed button   which cycles through four steps- 
Auto, Low, Medium, or High. Each time the button is pressed the fan speed mode is shifted.  
On/Off 
Energy Saver 
Timer 
Mode 
Check Filter 
Fan Speed 
Sleep 
Temp/Timer Up 
Temp/Timer Down 
Note: During “Dry Mode” the fan speed is controlled at Low automatically. 










