Installation Sheet
iii 
RESET
TEST
Operation of Safety Plug 
Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety 
plug. This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord. 
Before using your portable air conditioner, follow the instructions below to ensure that the LCDI plug is 
working properly: 
1.  Plug the power cord to a grounded outlet. 
2.  Press the TEST button on the LCDI plug. This should trip the plug and cut the power to the air 
conditioner. If the plug does not trip and you are able to turn on the unit, please contact EdgeStar 
support. 
DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST FAILS. 
Press the RESET button to start using your air conditioner. 
Do not use the TEST and RESET buttons as an ON/OFF switch. 
Note: Electrical products should not be disposed of with household waste. Please contact your local 
recycling center for more information about how to recycle electronic waste. 










