Installation Sheet

15
Fan Speed
The Fan Speed button is used to change the fan speed while in Cooling and Fan Only modes.
Press the Fan Speed button to select the fan speed. The Automatic, High, Medium, or Low
indicator can be selected.
Clock
The Clock button is used to set the Clock.
To set the Clock:
1. Press and hold the Clock button until the Clock indicator starts blinking.
2. Set the time by using the Up and Down buttons. Holding down the buttons longer than 1
second will change the time in fast mode. The clock is a 24-Hour clock so if it is 6:00 PM you would
set the time to be 18:00.
3. To save your settings press and hold the Clock button until the Clock indicator stops blinking.
Use the Chart below to set the 24-hour clock:
12-Hour
24-Hour
1:00 PM
2:00 PM
3:00 PM
4:00 PM
5:00 PM
6:00 PM
7:00 PM
8:00 PM
9:00 PM
10:00 PM
11:00 PM
12:00 AM
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
00:00
Note: You will not be able to change the fan speed if the unit is in Automatic or Dehumidify mode.