Manualshelf

Installation Sheet

ManualsBrandsKoldfront ManualsAir ConditionersKoldfront 12,000 BTU 115V Portable Air Conditioner - Cools Medium Room Up To 400 Square Feet - with 10,000 BTU Heater and InvisiMist Drain Technology
11121314151617181920
13
Mode Indicator
Function
Automatic
The unit will cool, dehumidify, or heat (some models) depending on the ambient
temperature. The mode and fan speed changes automatically. The front panel lights
will change to reflect the running mode.
Cooling
The unit will cool. The front panel lights will be blue.
Dehumidify
The unit will remove moisture from the air. The front panel lights will be yellow.
Fan Only
The unit will run as a fan and circulate air. The front panel lights will be green.
Heat
Available on certain models. The unit will heat. The front panel lights will be red.
OPERATING THE REMOTE CONTROL
Power
Use the Power button to turn the portable air conditioner on and off.
By default when you first use the power button, the unit will begin to operate in cooling mode and the
front panel will be illuminated in blue. The unit will remember the last used mode / settings if you shut
down and restart.
Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used
mode / settings once power is restored. The compressor will restart after 3 minutes.
Cooling Mode
Cooling mode cools and dehumidifies the air. If the ambient temperature drops below the temperature
you selected, the compressor turns off and the unit functions with the fan only. When the temperature
rises above the temperature you selected, the compressor turns on again. The front panel lights will be
blue. Whether your desired temperature can actually be reached depends on the ambient conditions.
The room temperature remaining above the set temperature is normal.
To operate the unit in cooling mode:
1. Make sure the power cord is plugged into a power outlet.
2. Press the Power button on the remote control.
3. Press the Mode button until the cooling indicator is selected.
4. Select the fan speed by using the Speed button.
5. Set the thermostat by using the Up and Down buttons. The thermostat is adjustable
between 64° F - 90° F in one degree increments. You can switch between Fahrenheit and Celsius by
pressing the button.
Note: The exhaust hose must be used in Cooling mode in order to cool a room.