Installation Sheet
12 
INSTALLING THE BATTERIES 
1.  Remove the cover on the back of the remote control. 
2.  Insert the batteries with the (+) and (-) ends pointing in the correct direction. 
3.  Slide the cover back on. 
REMOTE CONTROL LCD INDICATORS 
Indicators 
Transmitter 
This indicator appears when the Power or Timer button is signaling the unit. 
Fan Speed 
This indicator shows the set fan speed between   Automatic,   High, 
 Medium, and   Low. 
Mode 
This indicator shows the set mode between   Automatic,   Cooling, 
 Dehumidify,   Fan Only, and   Heat. 
Temperature Setting 
This indicator shows the set temperature. 
Fahrenheit and Celsius 
This indicator shows if the set temperature is in Fahrenheit or Celsius. 
Clock 
This indicator shows the Clockâs time. The remote control has a 24-Hour 
clock. 
Timed Hours 
This indicator shows the number of timed hours when the Timer is enabled. 
Timer 
This indicator shows if the On Timer or Off Timer is enabled. 
Caution: Use only AAA batteries. Remove the batteries if the remote control will not be used for one month 
or longer. Do not attempt to recharge batteries not designed to be recharged. All batteries should be 
replaced at the same time. Do not mix old and new batteries. Do not dispose of batteries in a fire as they 
may explode. 










