Installation Sheet

7
Do not lengthen the
exhaust hose by adding
additional hoses or
attachments.
CONNECTING THE DUCT CONNECTOR TO THE GRATED ADAPTER
8. Align the slots on the duct connector to the tabs on the grated adapter and snap the duct connector into
place.
After you have installed the exhaust hose and window kit, you can plug in your portable air conditioner and
start using it.
NOTES ABOUT THE EXHAUST HOSE
Your portable air conditioner is designed to exhaust condensate water that is collected from the air. This
water, in either gaseous or droplet form, will be expelled out of the exhaust port of the unit. Please take this
into account when deciding how to vent it.
1. The exhaust hose supplied with the portable air conditioner can be extended up to 48 inches; however
for maximum efficiency, use the shortest length possible.
2. Try to prevent any kinks or bends in the exhaust hose. Kinks or bends may trap exhaust air which can
radiate heat into the room or potentially cause the portable air conditioner to overheat and shut itself
off.
3. The exhaust hose supplied with the portable air conditioner has been specifically designed for this air
conditioner. Do not lengthen the hose by adding additional hoses or attachments or replace it with any
other hose.
Warning: Longer hoses are not recommended.