Owner Manual

7. Slide the assembled wall sleeve into the wall opening as shown below.

8. After the wall sleeve has been secured properly to the wall it is important that you seal any

remaining openings or cracks with a high grade caulking product in order to eliminate all points

of possible air or water infiltration.

9. Install the air conditioner according to the manufacturer’s instructions.

Note: Use a carpenter’s level to ensure that the wall sleeve is level from front to back and left to

right.

Note: Secure the wall sleeve to the wall using fasteners (not included) that are appropriate for the

type of wall in your home. Typically, wood screws (for wood constructed buildings) or masonry

screws (for cement or brick constructed buildings).