Owner Manual

2
Assemble the Wall Sleeve
1. Use four (4) screws to fasten the side panels to the bottom panel as shown below.
2. Fasten the top panel with four (4) screws as shown below.
Important: This wall sleeve is intended for use with a through the wall style air conditioning unit only
and cannot be used with a window mount style air conditioner. Use of a window style air conditioner
(side vented) inside of a wall sleeve designed for a through the wall style air conditioner (rear
vented) will result in performance issues and may result in unit failure.
Note: The arrows on the bottom panel point to the interior side of the wall sleeve.