User Manual

17
Digital Display:
This component displays the set temperature in “F” or “C” and the Auto-Timer settings. While
on Fan only mode it shows the room temperature.
Error Codes
AS - Room temperature sensor error
 Unplug the unit and plug it back in.
 If the error repeats call for service.
 Note- In Fan only mode it will display “LO” or “HI”.
- Evaporator temperature sensor error
 Unplug the unit and plug it back in.
 If the error repeats, call for service.
HS - Electric Heating sensor error
 Unplug the unit and plug it back in.
 If the error repeats, call for service.
Air Directional Louvers:
The 4-way air directional louvers allow you to direct the air flow Up, Down, Left, and Right
throughout the room as needed. To adjust the air directional louvers side to side use the center
handles as you move side to side. To pivot the louvers, press with your fingers until the desired
airflow direction is obtained.