User Manual

Install Air Conditioner Unit into Wall Sleeve

With the wall sleeve fully prepared, you are now ready to insert the air conditioner unit into the

wall sleeve. Two or more people may be required for this step.

1. Remove the CENTER cabinet screw on the left lower side of the air conditioner cabinet. Set

aside and / or discard the plastic washer.

2. The ground wire will be attached to the air conditioner cabinet using the screw you just

removed along with a Toothed Washer.

3. Gently slide the air conditioner cabinet into the Wall Sleeve. With the cabinet screw hole still

exposed, attach the ground wire to the cabinet using the cabinet screw making sure that the

Toothed Grounding Screw Washer is pressed against the cabinet.