SDS

Theabovetest(s)is/areaccreditedunderthelaboratory’sISO/IEC17025accreditationissued bytheANSI‐
A
SQNationalAccreditationBoard (ANAB)
accordingtocertificateandscopeofaccreditation(Cert ificate#AT‐1500.)Test(s)markedwith‘#’is/arenotcoveredunderthescopeofaccreditation.
Thetestresult(s)andconclusion(s)inthisreportrelatetothesample(s)testedasdescribedherein.
Thistestreportmaynotbereproducedinwholeorinpart,withoutwrittenapprovalofANSECOGroup(HK)Limited.
ANABisreco
g
nizedb
y
ILAC
,
APLACandIAACasasi
g
nator
y
ofmultilateralreco
g
nitionarran
g
ementsthatfacilitateacce
p
tanceoftestinternationall
y
.
 

TESTREPORT
Company: Numo Manufacturing
Test Report #
15H-03865(R1)
Recipient: Rebecca Williams Date of Issue: January 19, 2016
Recipient Email: [e-mail] Pages: Page 3 of 7
cc to Email: - Date Received: July 24, 2015
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: [phone] Fax: [phone]
ansecogroup.com
V
er.05CS-HK-RE005
DETAILED RESULTS:
Client’s Requirement, Total Cadmium in Substrate Materials
Analysis performed by Inductively Coupled Plasma-Optical Emission Spectrometry to determine compliance
with the above referenced specification. [Referenced Test Method: ASTM F963-11 Clause 8.3.1]
Specimen No. 1+2+3 4+5+6 7+8+9 --- --- Limit
Test Item
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Total
(ppm)
Total Cd ND ND ND --- --- 40
Conclusion PASS PASS PASS --- ---
Note:
Cd = Cadmium
ppm (Parts per million) = mg/kg (Milligrams per kilogram)
LT = Less than
ND = Not detected (Reporting Limit = 20ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration.