SDS

Theabovetest(s)is/areaccreditedunderthelaboratory’sISO/IEC17025accreditationissued bytheANSI‐
A
SQNationalAccreditationBoard (ANAB)
accordingtocertificateandscopeofaccreditation(Cert ificate#AT‐1500.)Test(s)markedwith‘#’is/arenotcoveredunderthescopeofaccreditation.
Thetestresult(s)andconclusion(s)inthisreportrelatetothesample(s)testedasdescr i bedherein.
Thistestreportmaynotbereproducedinwholeorinpart,withoutwrittenapprovalofANSECOGroup(HK)Limited.
ANABisreco
g
nizedb
y
ILAC
,
APLACandIAACasasi
g
nator
y
ofmultilateralreco
g
nitionarran
g
ementsthatfacilitateacce
p
tanceoftestinternationall
y
.



TESTREPORT
Company: Numo Manufacturing
Test Report #
15H-05637(R1)
Recipient: Rebecca Williams Date of Issue: January 19, 2016
Recipient Email: [e-mail] Pages: Page 3 of 9
cc to Email: - Date Received: November 09, 2015
ANSECO GROUP (HK) LIMITED 14/F, Yoo Hoo Tower, 38-42 Kwai Fung Crescent, Kwai Chung N.T., Hong Kong Tel: [phone] Fax: [phone]
ansecogroup.com
AT-1500
V
er.05CS-HK-RE005
DETAILED RESULTS:
Client’s Requirement, Total Cadmium in Substrate Materials
Analysis performed by Inductively Coupled Plasma-Optical Emission Spectrometry to determine compliance
with the above referenced specification. [Referenced Test Method: ASTM F963-11 Clause 8.3.1]
Specimen No. 1+2 3+4+5 6+7+8 9+10+11 12+13+14 Limit
Test Item
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Total
(ppm)
Total Cd ND ND ND ND ND 40
Conclusion PASS PASS PASS PASS PASS
Specimen No. 15+16+17 18 19 --- --- Limit
Test Item
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Result
(ppm)
Total
(ppm)
Total Cd ND ND ND --- --- 40
Conclusion PASS PASS PASS --- ---
Note:
Cd = Cadmium
ppm (Parts per million) = mg/kg (Milligrams per kilogram)
LT = Less than
ND = Not detected (Reporting Limit = 20ppm)
Composite results are based on specimen of least mass resulting in highest potential concentration.