User's Manual

A. Undo the four bolts attaching the Upper Footboard (B) to the Crib Sides (D & E) and
remove the upper footboard. There are two bolts on each side. It is not necessary to totally
remove them from the crib sides, just loosen until footboard can be removed.
B. Adjust the Mattress Support (H) to its lowest position, using the procedure shown in
Step 2.
C. Place the Left Day Bed Cap (F) against the Left Crib Side (D) (the extra two threaded
holes should face the inside of the crib as shown), align the two bolts with the holes on the
cap, and tighten with the allen wrench.
D. Repeat for the Right Day Bed Cap (G).
Converting to a Day Bed:
(F) Left Day Bed Cap
(G) Right Day Bed Cap
Undo both bolts on
each side
(B) Upper Footboard
Toddler guard rail holes
should face inside
(H) Mattress Support
Should be set to lowest position
(D) Left Crib Side
(E) Right Crib Side