User's Manual

A. Unroll the slat roll and center it on the bed rails. Insert the Wood Screws (D) into the slats
and tighten securely using a screwdriver.
B. Insert the 3/4” Allen screws (E) in the visible holes in the headboard. Tighten securely.
Wood screw (D)
Step 3:
3/4” Allen screw (E)
Slat Roll (C)
CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, LOOSE BOLTS OR
OTHER FASTENERS, MISSING PARTS, OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND
FREQUENTLY DURING USE. SECURELY TIGHTEN LOOSE BOLTS AND OTHER FASTENERS. DO
NOT USE IF ANY PARTS ARE MISSING, DAMAGED, OR BROKEN. CONTACT KOLCRAFT
ENTERPRISES, INC (www.kolcraft.com/customer-service/contact-kolcraft) FOR REPLACEMENT
PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE PARTS.