Specifications Sheet
Applicable Models
D Kohlerr Model RDT Automatic T ransfer Switch equipped with the load shed kit
D Kohlerr Model RXT single-phase Automatic T ransfer Switch equipped with the load shed kit or combined
interface/ load management board
The automatic transfer switch must be connected to a Kohlerr single-phase generator set equipped with the RDC2 or
DC2 controller.
Description
The Power Relay Module contains one 50 amp power relay mounted in a NEMA 3R housing. Use up to four power relay
modules with the load shed kit or the Model RXT automatic transfer switch with combined interface/load management
board.
D UL/cUL listed
D The module enclosure is rated NEMA 3R for installation indoors or outdoors.
D The module enclosure includes mounting holes for installation and recommended locations for conduit connections.
D Modules mount on a wall or other sturdy vertical surface.
D Normally closed relays are energized only when the load is shed, minimizing wear on the relays and ensuring that all
loads are connected when primary power is available.
D Relays include factory-installed connecting lugs.
Kohler Model RDT or
RXT transfer switch
with load shed kit
or
Model RXT transfer
switch with combined
interface/ load
management board
Residential/Light Commercial Generator Accessories
Power Relay Module
Kohler single-phase
generator set
equipped with RDC2
or DC2 controller
Power relay
module #1
Non-critical
load, can add
or shed
Connect up to 4 power relay modules in a load
management system.
Non-critical
load, can add
or shed
Power relay
module #2
Power relay
module #3
Non-critical
load, can add
or shed
Non-critical
load, can add
or shed
Power relay
module #4
Cover removed to show 50 amp relay, provided
G6-143 6/15