Specifications

Technical Information
Fixture*:
Bowl area Ø 15-7/8″ (403 mm)
Water depth 4-1/4″ (108 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Included components:
Adjustable linkage 84474
Cut-out template 1002980-7
Installation Notes
Install this product according to the installation guide.
Product does not have an overflow.
*Spout must be 5″ (127 mm) long (min) for adequate
clearance into the bathroom sink when installed with
centerline as shown.
**Spout must be tall enough to clear 3″ (76 mm) rim height
and provide a 1″ (25 mm) air gap per ASME A112.1.2
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cut-out errors when the incorrect cut-out
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Recommended ADA Installation
24" (610 mm)
K-2200
K-14222
K-14223
K-45922
10"
(254 mm)
* L of Fitting
C
* L of Fitting
C
10"
(254 mm)
Ø 16-1/4" (413 mm)
**3"
(76 mm)
6-3/8"
(162 mm)
1-1/4" OD
9"
(229 mm)
14"
(356 mm)
3/8" Hot
3/8" Cold
4" (102 mm)
34"
(864 mm)
27"
(686 mm)
Min
11"
(279 mm)
9"
(229 mm)
Min
2"
(51 mm)
8"
(203 mm)
Min
K-2191
K-2191-G
Product Diagram
ABOVE-COUNTER BATHROOM SINK
Page2of2
114430-4-
BJ