Product Card

KD33
ENGINE CHARACTERISTICS
JOHN DEERE
3029DFS29
Athmo
L
3
2.91
-
106 x 110
17.2 : 1
1500
5.5
31
+/- 2.5%
7.80
GENERAL ENGINE DATA
Engine model
Engine type
Air inlet
Cylinders arrangement
Number of cylinders
Displacement (L)
Charge Air coolant
Bore (mm) x Stroke (mm)
Compression ratio
Speed (RPM)
Pistons speed (m/s)
Maximum stand-by power at rated
RPM (kW)
Frequency regulation (%)
BMEP (bar)
Governor type
Mechanical
COOLING SYSTEM
Radiator & Engine capacity (L)
16.1
Max water temperature (°C)
-
Outlet water temperature (°C)
-
Fan power (kW)
0.7
1.74
20
Fan air flow w/o restriction (m3/s)
Available restriction on air flow (mm
H2O)
Type of coolant
Glycol-Ethylene
Thermostat modulating range HT (°C) -
74
1165
-
EMISSIONS
Emission PM (mg/Nm3) 5% O2
Emission CO (mg/Nm3) 5% O2
Emission HC+NOx (g/kWh)
Emission HC (mg/Nm3
) 5% O2
30
555
78
EXHAUST
Exhaust gas temperature @ ESP 50Hz (°C)
Exhaust gas flow @ ESP 50Hz (L/s)
Max. exhaust back pressure (mm H2O)
625
FUEL
Consumption @ 110% load (L/h)
8.5
Consumption @ 100% load (L/h)
7
Consumption @ 75% load (L/h)
5
Consumption @ 50% load (L/h)
3.6
Maximum fuel pump flow (L/h)
111
6
1
5
-
OIL
Oil capacity (L)
Min. oil pressure (bar)
Max. oil pressure (bar)
Oil consumption 100% load (L/h)
Oil sump capacity (L)
5.3
31
6
HEAT BALANCE
Heat rejection to exhaust (kW)
Radiated heat to ambient (kW)
Heat rejection to coolant (kW)
18
300
AIR INTAKE
Max. intake restriction (mm H2O)
Intake air flow (L/s)
28
This document is not contractual - Kohler Co. reserves the right to modify any of the characteristics without notice, in a constant effort to improve the quality of its products.
GBD5-03002 (KD33) 03/17