Dimensions Guide

*If 3-1/2" (89 mm) to
4-1/4" (108 mm) use
deep roughing-in kit.
Finished Wall
K-8300 Valve
Series
K-2971-KS,
K-304 Valves
4-3/16" (106 mm)
Ø 6-3/8" (162 mm)
3-9/16"
(90 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
NoDrain included:
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
Handshower:
2.5 gal/min (9.5 l/min)Rated maximum flow:
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
80 psi (5.5 bar)Pressure:
Showerhead/Body Spray:
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
2.5 gal/min (9.5 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
4-10-2020 06:28 - US/CA
Avid
™
Rite-Temp
®
valve trim with lever handle
K-TS97018-4