Specification

Required Accessories
K-304-* Rite-Temp
®
valve OR ❑ NA
K-2971-KS HiFlow Rite-Temp valve with stops ❑ NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In Sheet.
Optional Accessories
88526 HiFlow Rite-Temp
®
thin wall installation kit ❑ CP ❑ Other____
1030932 Deep roughing-in kit for Rite-Temp
®
valve (all handles) ❑ NA
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between valve and wall-mount
spout.
1/2" - 14 NPT
1/2" - 14 NPT
7"
(17.8 cm)
7-3/4"
(19.7 cm)
6-1/2"
(16.5 cm) D.
4-7/8" (12.4 cm)
4"
(10.2 cm)
10" (25.4 cm)
To Spout
(Bath Only)
48" (121.9 cm)
To Floor
(Shower Only)
72" (182.9 cm) -
78" (198.1 cm)
To Floor
(Typical)
Top of Bath
Cut-out Detail For
Deck Installation
Tower Piping
Attaches Here
3" (7.6 cm)
1" (2.5 cm)
3" (7.6 cm)
1" (2.5 cm)
Traditional
Scroll
Product Diagram
REVIVAL
®
REVIVAL
®
BATH AND SHOWER FAUCET TRIM
Page2of2
1104833-4-
B