Specification

Optional Accessories
K-12002 Plug button set ❑ Other___
88526 HiFlow Rite-Temp thin wall installation Kit ❑ CP ❑ PB ❑ Other___
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (178 mm) to 18″ (457
mm) with single elbow between valve and wall-mount spout.
1/2" NPT
5-1/2"
(140 mm)
72" (1829 mm) -
78" (1981 mm)
to Floor (Typical)
Ø 6-1/2" (165 mm)
1/2" Cold
48" (1219 mm)
to Floor
(Shower Only)
10" (254 mm)
to Spout
(Bath Only)
4" (102 mm) to
Top of Rim
4-7/8" (124 mm)
4" (102 mm)
W/O Stops
1/2" Hot
5-5/8"
(143 mm)
1/2"-14 NPT or
5/8" ID for 1/2" NOM
Copper Tubing
2-3/4" (70 mm)
Thin Wall
2-3/4" (70 mm) - 3-1/2"
(89 mm) Thick Wall
For slip-fit spout, 5/8" OD tube must
extend 1-1/2" (38 mm) min to 2-7/8"
(73 mm) max beyond the finished wall.
For 1/2" NPT spout, pipe must extend
3-3/4" (95 mm) beyond the finished wall.
Product Diagram
FAIRFAX
®
FAIRFAX
®
BATH AND SHOWER VALVE TRIM
Page2of2
1178892-4-
A