Installation Sheet

9. Connect the Light Cables
Connect the two light cables from the mirror to the connectors from the power bar.
Tuck the wires into the top of the mirror.
For models with pivoting side panels: Verify that the panels move freely without binding the
cables.
Turn on the electrical power to the mirror.
Check that the settings on the control module at the bottom of the mirror are illuminated.
Install the Caps
Press the caps to the top and bottom of the mirror.
For models with pivoting side panels: Install the caps to the top and bottom of the pivoting
panels.
Kohler Co. 13 1337910-2-B