Specification

Technical Information
Fixture*:
Basin area:
Bathing area, bottom 42″ (1067 mm) x 25″ (635 mm)
Bathing area, top 58″ (1473 mm) x 29″ (737 mm)
Weight 510 lbs (231 kg)
To overflow:
Water depth 18″ (457 mm)
Capacity 96 gal (363.4 L)
* Approximate measurements for comparison only.
Pump: V Hz A
240 50/60 15
Drop-in cut-out 65-1/2″ (1664 mm) x 35-1/2″
(902 mm) Max
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
81 lbs/square foot (395 kg/square meter) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
A pump/control access panel is required.
Pump/piping protrudes beyond the rim (see below).
Hot water supply should be 70% of the water capacity or
greater. Installations will vary.
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H Min
18"
(457 mm)
2-1/2"
(64 mm)
No change in measurements with drain
shown. (K-7148-AF or K-7148M-AF)
3/4" (19 mm)
23"
(584 mm)
36" (914 mm)
11" (279 mm)
66" (1676 mm)
2-7/8" (73 mm)
3" (76 mm)
1-1/2" OD
1/2" (13 mm)
2" (51 mm) Max
NOTE: Pump/piping protrudes beyond rim.
Product Diagram
TEA-FOR-TWO
®
TEA-FOR-TWO
®
5.5’ EXPERIENCE BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE
Page2of2
1023272-4-
J