Specification

Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
45” (1143 mm) x 23” (584 mm)
Basin area, top 54” (1372 mm) x 25” (635 mm)
Weight 390 lbs (176.9 kg)
To overflow:
Water depth 11-5/8” (295 mm)
Capacity 52 gal (196.8 L)
* Approximate measurements for comparison only.
Blower
motor:
Heater V Hz A
300 W 220-240 50/60 3
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control 220-240 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
NOTICE: If the blower motor and check valve are
relocated, two access panels are required. Locate one
access panel at the blower motor/control location and the
other at the control box. Locate the blower motor and check
valve together.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Floor support under bath must provide for a minimum of 61
lbs/square foot (295 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
1-1/2" OD
No change in measurements if connected
with drain illustrated. (K-7161-AF)
Blower Motor/Control Access
34" (864 mm) W x
15" (381 mm) H
60" (1524 mm)
32"
(813 mm)
16"
(406 mm)
1-13/16" (46 mm)
8-1/2" (216 mm)
2-7/8" (73 mm)
3" (76 mm)
NOTE: Blower protrusion beyond the rim.
1-1/2"
(38 mm)
17-7/16"
(443 mm)
1/8" (3 mm)
33-3/4" (857 mm)
1" (25 mm)
3-1/4" (83 mm)
Product Diagram
MEMOIRS
®
MEMOIRS
®
5’ (1.5 m) BUBBLEMASSAGETM BATH
Page2of2
1143443-4-
B