Specification Sheet

4-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Remote blower installation is required. Relocation
kit is included.
FreestandingInstallation:
CenterDrain location:
43" x 25-5/8" (1093 mm x 651 mm)Basin area, bottom:
55-9/16" x 28-3/8" (1411 mm x 720 mm)Basin area, top:
94.5 lbs (42.9 kg)Weight:
45.4 lbs/ft² (221.7 kg/m²)Minimum floor load:
16-5/16" (415 mm)Water depth:
72.017 gal (272.6 L)Water capacity:
Footprint, 1265462, not required, not
included
Template:
Blower: 120 V, 10 A, 60 Hz, 300 WElectrical component
rating:
VariableBlower speed:
0" (0 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-20-2016 06:07
Underscore
®
5' BubbleMassage
™
Bath
K-5702-G