Specification

Recommended Accessories (cont.)
K-7668 3/8″ NPT straight stop OR ❑ CP ❑ Other_____
K-7678 1/2″ NPT straight stop ❑ CP ❑ Other_____
Technical Information
Fixture:
Configuration two-piece, elongated
Water per flush 1.6 gpf (6 lpf) or 1.0 gpf (3.8 lpf)
Passageway 2″ (5.1 cm)
Water area 4-1/2″ (11.4 cm) x
5-3/4″(14.6 cm)
Water depth from rim 8-1/2″ (21.6 cm)
Seat post hole centers 5-1/2″ (14 cm)
Included components:
Bowl K-4353
Tank K-4441
Tank cover 1115480
Push buttons 1072961
Installation Notes
IMPORTANT! The rough-in must be 12″ (30.5 cm) or more
from the base of the wall or baseboard. Install or relocate the
supply and outlet as necessary to conform to rough-in
dimensions.
If this toilet is installed to new construction, install a new
supply stop following the dimensions in the diagram.
In installations with the supply stop installed, the existing
supply stop may need to be relocated if it is less than 8-1/2″
(21.6 cm) from the centerline of the toilet. Dry fit the toilet to
confirm if the supply stop needs to be relocated.
The supplied hose will extend roughly 6″ (15.2 cm) from the
toilet. If the supplied hose does not reach the supply stop, a
longer supply hose may be used.
12" (30.5 cm)
8-1/2"
(21.6 cm) Min
28-5/8" (72.7 cm)
11-13/16"
(30 cm)
11" (27.9 cm)
16-1/2"
(41.9 cm)
3/8" NPT
Supply
14-3/4"
(37.5 cm)
12-1/4"
(31.1 cm)
Front of Bowl
7"
(17.8 cm) D.
3/8" D.
Mounting
Holes
32-1/2"
(82.6 cm)
12"
(30.5 cm)
Min
7-1/2"
(19.1 cm)
6-5/8"
(16.8 cm)
11-5/8"
(29.5 cm)
7"
(17.8 cm)
5" (12.7 cm) Range
For Existing Supply
Finshed
Wall
1-3/4"
(4.4 cm)
1/2"
(1.3 cm)
1-3/4"
(4.4 cm)
Finshed
Wall
14-3/16"
(36 cm)
Product Diagram
PERSUADE
®
PERSUADE
®
DUAL FLUSH TOILET
Page2of2
1116451-4-
B