Specification

Optional Accessories
K-9433 Twin Touch
TM dual flush selector (non-CP) ❑ PB ❑ Other_____
Technical Information
Fixture:
Configuration One-piece, elongated
Water per flush 1 gal (3.8 L) / 1.4 gal (5.3 L)
Passageway 2-1/8″ (54 mm)
Water depth from rim 5-7/8″ (149 mm)
Water area 12″ (305 mm) x 10″ (254 mm)
Seat post hole
centers
5-1/2″ (140 mm)
Pump 120 VAC, 8.5 A, 60 Hz
Minimum static
pressure required
15 psi (103.4 kPa)
Included components:
Tank cover 1055954
Bolt cap accessory pack 1013092
Toilet seat K-4744
Twin TouchTM dual flush selector 81996
Tank accessory pack 84301
Pump 84153
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Receptacle 120 VAC, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
For back-to-back toilet installations: Use only a 45° double
wye fitting.
19-1/2" (495 mm)
Front of Bowl
3/8" NPT Supply
12" (305 mm)
30" (762 mm)
4-7/8"
(124 mm)
4-3/4"
(121 mm)
10-1/4"
(260 mm)
16-5/8"
(422 mm)
6-1/2"
(165 mm)
2-5/8"
(67 mm)
16-1/2"
(419 mm)
3"
(76 mm)
21-1/2"
(546 mm)
9-3/4"
(248 mm)
1/2"
(13 mm)
Do not use a
double sanitary tee.
Use a 45˚ double
wye fitting.
For Back-to-Back Toilet Installations
L of Outlet
C
Product Diagram
SAN RAPHAELTM
SAN RAPHAELTM POWER LITE
®
TOILET WITH BIDET FUNCTIONALITY
Page2of2
1092035-4-
E