Installation Sheet

4. Install the Interior Hinge Components
Interior
Gasket
Shim
NOTE: Verify that the groove on the interior gasket faces toward the glass.
NOTE: For 5/16" (8 mm) thick glass, no shim is needed. For 3/8" (10 mm) thick glass, one shim is needed. For 1/2″ (13 mm)
thick glass, two shims are needed.
Secure the gasket, shim(s) (if needed), and inner plate to the outside hinge body with the two hex screws.
Tighten the screws securely with the 4 mm hex wrench.
Repeat for the second hinge.
Kohler Co. 9
1409304-2-B