Installation Sheet

22. Left Pivot Configuration
L-Bracket
Clamp
IMPORTANT! Follow these steps only if the door will be installed in a left pivot conguration. If installing in the right
pivot conguration, continue to “Install the L-Bracket and Clamp.”
NOTE: If no xed panel bracket is supplied, continue to “Seal the Shower Door Exterior” as the xed panel bracket is not
required.
Remove the L-bracket cover and remove the two hex head screws using the provided 3 mm hex wrench. Remove the
L-bracket from the clamp.
Reverse the L-bracket as shown and reinstall to the clamp.
Kohler Co. 28
1409304-2-B