Installation Sheet

12. Install the Fixed Panel Wall Jamb
#6-18 x1-1/2" Screw
Screw Head
Cover
CAUTION: Risk of product damage. Verify that the screw head covers are installed to prevent damage to the xed
panel.
IMPORTANT! Install the xed panel w
all jamb in the same position as in the previous steps.
Install the screw head covers on three of the provided #6-18 x 1-1/2" screws.
Align the holes in the xed panel wall jamb to the anchors in the wall and secure with three of the #6-18 x 1-1/2″
screws.
Verify that the xed panel wall jamb for plumb. If necessary, loosen the screws and adjust until plumb.
Kohler Co. 17
1409304-2-B