Specification

67-3/4" (1721 mm)
Notes
Required Electrical Service
Measure your actual product for roughing-in
details. Install this product in accordance with the
installation instructions.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
120 V, 15 A, 60 HzHeated Surface,
Amplifier:
Locate the bath within 24" (610 mm) of a
GFCI-protected 120 V, 15 A grounded electrical
outlet. A second grounded outlet within the wall
Technical Information
framing must be within 24" (610 mm) of the
All product dimensions are nominal.
planned control amplifier. Provide a third
FreestandingInstallation:
grounded outlet if connecting a powered wireless
ReversibleDrain location:
device or adapter. One electrical service may be
used for the entire bath and related electrical
components.
51-1/16" x 19-11/16" (1297 mm x 500 mm)Basin area, bottom:
58-9/16" x 25-5/16" (1487 mm x 643 mm)Basin area, top:
96 lbs (43.5 kg)Weight:
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
43.9 lbs/ft² (214.3 kg/m²)Minimum floor load:
NOTICE: Do not support the load weight of the
bath by the rim. Confirm adequate support for
15-1/16" (383 mm)Water depth:
65 gal (246.1 L)Water capacity:
rim-mount faucet; do not use faucets as a means
of support.
Heated Surface: 120 V, 1.1 A, 60 Hz
Amplifier: 120 V, 50/60 Hz, 15 W
Electrical rating:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
3-speedPump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
11-11-2014 01:48
ARCHER
®
68" FREESTANDING VibrAcoustic BATH WITH
K-2595-VBW